SUBMERSIBLE PUMPS

We stock all of the tollowing submersible pumps for quick shipping, but can supply many others not listed. See the "Pumps" page for information about pump selection, types, duty ratings, and flow rates. (Notes: gph = gallons per hour, pipe = minimum recommended inside diameter of hose or flex pipe, LxWxH = length x width x height in inches)

SUPREME IN-LINE PUMPS: These compact, standard-duty submersible pumps utilize energy-efficient, magnetic-drive technology. We stock seven Pondmaster pumps with peak flow rates from 250 to 5000 gph (PM2, PM5, PM9, PM12, PM18, PM24, and PM36). All pumps have long-life ceramic impeller shafts, threaded inlets and outlets, and 18-foot power cords – features rarely found on other magnetic-drive pumps. A small foam pre-filter is supplied with most pumps, but we recommend using independent pre-filters.

SPECIFICATIONS FOR SUPREME PUMPS

model PM5 PM9 PM12 PM18 PM24 PM36

type in-line in-line in-line in-line in-line in-line

duty standard standard standard standard standard standard

gph 500 950 1200 1800 2400 3600

watts 45 95 110 145 265 380

inlet 1/2" 3/4" 3/4" 3/4" 1" 1"

outlet 1/2" 3/4" 3/4" 3/4" 1" 1"

pipe 3/4" 1" 1-1/4" 1-1/4" 1-1/2" 2"

cord 18 ft 18 ft 18 ft 18 ft 18 ft 18 ft

LxWxH 5x4x4 6x3x5 6x3x5 6x3x5 8x4x6 8x4x6

warranty 1 year 1 year 1 year 1 year 1 year 1 year

Supreme PM2 In-Line Pump, 250 gph, $52.00
Supreme PM5 In-Line Pump, 500 gph, $66.00
Supreme PM9 In-Line Pump, 950 gph, $92.00
Supreme PM12 In-Line Pump, 1200 gph, $128.00
Supreme PM18 In-Line Pump, 1800 gph, $144.00
Supreme PM24 In-Line Pump, 2400 gph, $164.00
Supreme PM36 In-Line Pump, 3600 gph, $196.00

Supreme PM5

Supreme PM 9, PM12, PM18

Supreme PM24, PM36

LEADER UTILITY AND SOLIDS PUMPS: These standard-duty submersible pumps offer higher flow rates than magnetic-drive pumps at a cost that is significantly less than heavy-duty pumps with similar flow rates. We stock two Ecosub utility pumps with peak flow rates of 2225 and 3950 GPH (ES410, ES420) and two Ecovort solids pumps with peak flow rates of 2050 and 3750 GPH (EV510, EV520). All feature ceramic shaft sleeves for reliable operation and capacitor-start motors for moderate energy-efficiency. The solids version can pass debris as large as one inch and is suitable for use without a pre-filter. All pumps are also available in an automatic shutoff version with an integral float switch to protect the pump in low-water conditions (ES410A, ES420A, EV510A, EV520A).

SPECIFICATIONS FOR LEADER PUMPS

model ES410 ES420 EV510 EV520

type utility utility solids solids

duty standard standard standard standard

gph 2220 3960 2040 3660

watts 300 700 330 650

outlet 1-1/4" 1-1/4" 1-1/4" 1-1/4"

pipe 1-1/2" 2" 1-1/2" 2"

cord 16 ft 16 ft 16 ft 16 ft

LxWxH 6x6x11 6x6x12 6x6x12 6x6x12

warranty 1 year 1 year 1 year 1 year

Leader ES410 Utility Pump, 2220 gph, $104.00
Leader ES410A Utility Pump, auto, 2220 gph, $120.00
Leader ES420 Utility Pump, 3960 gph, $156.00
Leader ES420A Utility Pump, auto, 3960 gph, $172.00
Leader EV510 Solids Pump, 2040 gph, $148.00
Leader EV510A Solids Pump, auto, 2040 gph, $160.00
Leader EV520 Solids Pump, 3660 gph, $196.00
Leader EV520A Solids Pump, auto, 3660 gph, $212.00

Leader ES410, ES420

Leader EV510, EV520

OASE FOUNTAIN PUMPS: Oase submersible pumps are world famous for their energy-efficiency and durability. We stock four standard-duty utility pumps with peak flow rates from 325 to 2000 GPH (Aquarius 325, 660, 1300, 2000), and four heavy-duty combination in-line/utility pumps with peak flow rates from 800 to 2700 GPH (Nautilus 10, 30, 45, 60). Their remarkably low electricity consumption yields substantial savings when compared to pumps with similar flow characteristics, and their superior-quality construction assures a very long life (3-year warranty on Aquarius and 5-year warranty on Nautilus pumps). We also stock two heavy-duty pumps with peak flow rates of 5820 and 8520 GPH (Atlantis 500, 1000) for larger water features.

Aquarius pumps are powered by super-efficient, flexible-impeller, magnetic-drive technology. A slotted housing completely surrounds the pump and serves as an oversized inlet screen, and a flow-control valve is built in to the end of the inlet screen. Nautilus pumps utilize direct-drive technology with ceramic shafts and bearings, and feature stainless-steel motor housings. Although they are supplied with slotted inlet screens in the style of utility pumps, removing the screen converts them to in-line pumps with threaded inlets for connection to pre-filters. Atlantis pumps are direct-drive stainless-steel pumps that are completely encased in a stainless-steel fliter-screen housing with cast bronze end plates.

Oase is the world leader in fountain technology, and all three pumps are ideal for operating Oase's extensive line of professional-quality plastic, stainless-steel, and brass fountainheads, many of which we stock On special order, we can supply fountain pumps up to 100 horsepower, capable of shooting water hundreds of feet into the air.

SPECIFICATIONS FOR OASE
AQUARIUS PUMPS

model AQ325 AQ660 AQ1300 AQ2000

type utility utility utility utility

duty standard standard standard standard

gph 325 660 1300 2000

watts 10 28 80 125

inlet - - - -

outlet 1/2" 1/2" 1" 1"

pipe 1/2" 3/4" 1-1/4" 1-1/2"

cord 15 ft 15 ft 15 ft 15 ft

LxWxH 7x4x4 7x4x4 9x6x7 9x6x7

warranty 3 years 3 years 3 years 3 years

SPECIFICATIONS FOR OASE
NAUTILUS AND ATLANTIS PUMPS

model N10 N30 N45 N60 AT500 AT1000

type in-line in-line in-line in-line utility utility

duty heavy heavy heavy heavy heavy heavy

gph 810 1460 1630 2700 5820 8520

watts 55 70 100 260 680 1200

inlet 1-1/4" 1-1/4" 1-14" 1-1/2" - -

outlet 1/2" 1" 1" 1-1/4" 2" 2"

pipe 1" 1-1/4" 1-1/4" 1-1/2" 2" 2"

cord 20 ft 20 ft 20 ft 20 ft 10 ft 10 ft

LxWxH 8x4x4 8x6x5 8x6x5 10x7x6 14x9x10 17x9x10

warranty 5 years 5 years 5 years 5 years 1 year 1 year

Oase A325 Fountain Pump, 325 gph, $60.00
Oase A660 Fountain Pump, 660 gph, $88.00
Oase A1300 Fountain Pump, 1300 gph, $144.00
Oase A2000 Fountain Pump, 2000 gph, $164.00
Oase AT500 Utility Pump, 5820 gph, $788.00
Oase AT1000 Utility Pump, 8520 gph, $940.00

Oase AQ325, AQ660
AQ1300, AQ2000

Oase Nautilus

Oase N60

TSURUMI SUBMERSIBLE SOLIDS AND AXIAL PUMPS: The pumps made by this Japanese manufacturer are known for their energy-efficiency and superior-quality construction. The smallest in the series is a newly-updated version of a solids pump that has long been the favorite of professional pond builders (2-PU, 3400 GPH). For larger ponds, we offer Tsurumi's most advanced pump design, with peak flow rates from 4250 to 6250 GPH (3-PN, 4-PN, and 8-PN). We also can supply their remarkable heavy-duty utility pump with a super-efficient axial flow impeller capable of moving more than 15,000 GPH (AB2/4) with only 750 watts of power! All five pumps feature ceramic shaft seals, stainless-steel motor housings, solids-handling capacity, long power cords, and two-year warranties. Although Tsurumi pumps use dry-motor technology, they do contain a small amount of oil shaft lubricant than can be easily changed to assure the longest possible pump life (use readily available mineral oil or canola oil).

SPECIFICATIONS FOR TSURUMI PUMPS

model OM-2 2-PU 3-PN 4-PN 8-PN AB2.4

type utility solids solids solids solids axial

duty heavy heavy heavy heavy solids heavy

gph 3350 3400 4250 5400 6250 15600

watts 230 230 550 710 980 750

outlet 1-1/2" 2" 2" 2" 2" 4"

pipe 2" 2" 2" 2" 2" 4"

cord 20 ft 20 ft 32 ft 32 ft 32 ft 32 ft

LxWxH 7x9x15 7x9x15 7x10x15 7x10x16 7x10x16 10x10x19

warranty 2 years 2 years 2 years 2 years 2 years 2 years

Tsurumi OM-2 Solids Pump, 3000 gph, $196.00
Tsurumi OMA-2 Solids Pump, auto, 3000 gph, $264.00
Tsurumi 2-PU Solids Pump, 3000 gph, $252.00
Tsurumi 2-PUA Solids Pump, auto, 3000 gph, $308.00
Tsurumi 3-PN Solids Pump, 4250 gph, $408.00
Tsurumi 4-PN Solids Pump, 5400 gph, $464.00
Tsurumi 8-PN Solids Pump, 6250 gph, $608.00
Tsurumi AB2.4 Axial Pump, 15600 gph, $860.00
Tsurumi HS2.4 Solids Pump, for pond cleaning, $296.00

Tsurumi OM-2

Tsurumi 2-PU

Tsurumi 3PN, 4PN, 8PN

Tsurumi AB2/4

EBARA SOLIDS PUMPS: These heavy-duty submersible pumps offer moderate to high flow rates with good energy-efficiency and superior reliability. All feature stainless-steel construction and ceramic shaft seals. The Prodrainer utility pump, which offers a peak flow rate of 3000 GPH (PRO-1/3, PRO-1/3A with automatic shutoff) is quite inexpensive for the quality and has become our most popular pump. The Dominator solids pumps, which offer peak flow rates from 6950 to 10075 GPH (DOM-0.5, DOM-1.0, DOM-1.5, and DOM-2.0), are also very reasonably priced and can pass debris as large as two-inches without clogging! Although they use dry-motor technology, Ebara pumps contain a small amount of oil shaft lubricant.

SPECIFICATIONS FOR EBARA PUMPS

model DOM-0.5 DOM-1.0 DOM-1.5 DOM-2.0

type solids solids solids solids

duty heavy heavy heavy heavy

gph 6720 9720 10620 12600

watts 940 1260 1440 2100

outlet 2" 2" 2" 2"

pipe 2" 3" 3" 3"

cord 25 ft 25 ft 25 ft 25 ft

LxWxH 8x9x22 8x9x23 8x9x23 8x9x24

warranty 1 year 1 year 1 year 1 year

Ebara DOM-1/2 Solids Pump, 6720 gph, $556.00
Ebara DOM-1 Solids Pump, 9720 gph, $652.00
Ebara DOM-1.5 Solids Pump, 10620 gph, $696.00
Ebara DOM-2 Solids Pump, 12600 gph, $816.00

Ebara DOM-0.5, DOM-1.0
DOM-1.5, DOM-2.0